...
Here is a picture of the Swift, it is primarily used for our biggest jobs This is a picture of one of our IQ's, we have two placed This is our Tube Router, the sole and only purpose of this machine
as it has the best fixturing system as well as the largest workspace: right next to each other in the shop: is to manufacture box tubes
We also use a software called Vcarve to generate the Gcode required by the machine to run. In short, Gcode is the programming language for the machine (the same language as the 3D printers). These instructions tell the spindle where to move and when, to trace out the cuts that the machine needs to do.
...