Page History

...

Here is a video on our organized drill bit and endmill drawer, it will explain what is the difference between a bit and an endmill and how to correctly select the right sizes of bits, endmills and collets.

Here is a picture of the Swift, it is primarily used for our biggest jobs              This is a picture of one of our IQ's, we have two placed                                  This is our Tube Router, the sole and only purpose of this machine

...

How to operate the machine?

Main System:

 Here Here is a video on how to turn on the and activate the vacuum on the machine.

the power to the machine itself and the vacuum fixturing system.                                                                         going to be the primary tool you use to operate the machine.

Image Removed                                                       Image Removed

Once the machine finishes booting up there will be an option on the controller to At the bottom of the structure there is the main power switch, simply turn it to the right. Next, we you need to switch the key from 0 to 1, and finally press the Green button, wait for a few seconds and the router will start booting up. To the left of the green button is the Emergency Stop button. Only press this if you are actually in an emergency/unsure of what the machine is about to do. Once the machine finishes booting up there will be an option on the controller to HOME the axis, you MUST click this button as the router needs to have a general set point to begin a job. 

...