...
A part you are printing requires support material. What kind of build adhesion should you use to print?
- None
- Skirt
- Brim
- Raft
You need to print a pulley. Should you use support material? (Multiple may apply)
- No
- Yes, but use caution
- Yes. Always
10 spacers are required for the drive-train transmission. What layer height should you use?
- 0.10mm
- 0.12mm
- 0.2mm
- 0.22mm
When exporting an STL from OnShape, what unit should you export the file as?
- Inches
- Meters
- Centimeters
- Millimeters
Check all that apply. Before printing, verify:
...