Breaker

• Plugs into PDH, allows power to travel to devices.
• Limits currents to protect devices
• Labeled with amps (current unit
• 

Mini Fuses

• Plugs into Mini PDP, allows power to travel to devices
• Top has the number of AMPs labeled on it
• 

WAGO Lever Nuts

• Makes a connection between two wires
• Tug on the wire to verify connection
• If it does come out, double check the length and smooth out the copper
• 

CAN Lever Nuts

• Makes a connection between two CAN wires
• Tug on the wire to verify connection
• Make sure to close down all the way -- otherwise wires WILL come out
• 

Ferrules

• Used to secure/terminate wire ends
• 

CAN Clips

• Holds dupont CAN connections together, and ensures that it will not come loose while driving 
• Won’t ever need to make a dupont connection in pit

Stubs

• An out/an in spliced into a connection

Electrical Tape

• Taping broken slits of wires CASING (casing ONLY -- not wire)
• To cover up ports on Rio, PDH, etc. to protect metal shards from falling into them
• Shields and insulates wires to protect them
• All exposed and not plugged in wires must be wrapped (power only)\
• 

VHB Tape

• Very strong double sided tape 
• Pressure activated
• Must press down really hard to activate
• Used for securing two flat surfaces together
• Extremely difficult to take off -- so be careful when sticking it on
• Usually for radio, switch, etc.
•