Page History

...

Breaker

• Plugs into PDH, allows power to travel to devices.
• Limits currents to protect devices
• Labeled with AMPsamps (current unit)Image Added

Mini Fuses

• Plugs into Mini PDP, allows power to travel to devices
• Top has the number of AMPs labeled on itImage Added

...

WAGO Lever Nuts

• Makes a connection between two power or data wires
• The side (as shown below) has a line which indicates the length needed to get stripped
• Must be extremely careful while seating in because it will come out otherwise
• Make sure to perform the “tug-test” (steps below)
• Seat wire in at right length
• Tug on it (firmly but carefully), and make sure it does not fall out
• Tug on the wire to verify connection
• If it does come out, make sure to double check the length and re-strip it or straighten out and re-insert itsmooth out the copperImage AddedImage Added

CAN Lever Nuts

• Makes a connection between two CAN wires
• MUST also be EXTREMELY careful while seating in because it will come out otherwiseTug on the wire to verify connection
• Make sure to close down all the way -- otherwise wires WILL come outImage Added

Ferrules

• Used to secure/terminate wire ends
• Image Added

CAN Clips

• Holds dupont CAN connections together, and ensures that it will not come loose while driving 
• Won’t ever need to make a dupont connection in pit

Stubs

• They help splice the wires so more connections can be made in the same placeAn out/an in spliced into a connection