Breaker
- Plugs into PDH, allows power to travel to devices.
- Limits currents to protect devices
- Labeled with amps (current unit
Mini Fuses
- Plugs into Mini PDP, allows power to travel to devices
- Top has the number of AMPs labeled on it
WAGO Lever Nuts
- Makes a connection between two wires
- Tug on the wire to verify connection
- If it does come out, double check the length and smooth out the copper
CAN Lever Nuts
- Makes a connection between two CAN wires
- Tug on the wire to verify connection
- Make sure to close down all the way -- otherwise wires WILL come out
Ferrules
- Used to secure/terminate wire ends
CAN Clips
- Holds dupont CAN connections together, and ensures that it will not come loose while driving
- Won’t ever need to make a dupont connection in pit
Stubs
- An out/an in spliced into a connection
Electrical Tape
- Taping broken slits of wires CASING (casing ONLY -- not wire)
- To cover up ports on Rio, PDH, etc. to protect metal shards from falling into them
- Shields and insulates wires to protect them
- All exposed and not plugged in wires must be wrapped (power only)\
VHB Tape
- Very strong double sided tape
- Pressure activated
- Must press down really hard to activate
- Used for securing two flat surfaces together
- Extremely difficult to take off -- so be careful when sticking it on
- Usually for radio, switch, etc.
